|
Cross-Connection Control Program
The Cross-Connection Control Program was established by Ordinance 50-01 for the protection of the public water system of the City of Fort Smith from the possibility of hazards from backflow into the public water system. The purpose of the program is to eliminate or control cross-connections, actual or potential, thereby protecting the public water system from the User’s service connection.
The program was established to provide for the maintenance of a continuing program of cross-connection control that will systematically prevent a hazard from affecting the public water system.
Typical Installation Requirements
Where required all backflow prevention assemblies must be installed in accordance with Division 8 of the City of Fort Smith’s Cross-Connection Control Program. For the installers convenience a quick reference guide for the installation of an approved backflow prevention assembly is provided.
Plans & Standard Installation Notes
Plans for the installation of backflow prevention assemblies on water service lines are required to be submitted to the Utility Department. Plans must include current standard installation notes. Standard installation notes for a Reduced Pressure Zone Assembly (Domestic, Irrigation, or Irrigation Combined water services) and a Detector Double Check Valve Assembly (Fire Protection water service only) are provided.
Tester Technicians
The City of Fort Smith’s Cross-Connection Control Program requires all Backflow Assembly tests to be performed by a certified Assembly Testing Technician licensed by the Arkansas Department of Health. As a service to our customers a list of certified testers active in the local area is provided.
Contact Us
Questions about the Cross-Connection Control Program? Contact:
John Beard, Supervisor Metering & Transmission Line Maintenance
City of Fort Smith Utility Department
3900 Kelley Hwy.
Fort Smith, AR 72904
Phone: (479) 784-2282
Fax: (479) 784-2358
E-Mail: [email protected] |
